Manual Shaft Detent Assembly Removal
WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS CORP. Manual Shaft Detent Assembly Removal
| Callout |
Component Name |
| 1 |
Manual Shift Detent Spring Bolt |
| 2 |
Manual Shift Detent Assembly |
| 3 |
Control Valve Channel Plate Bolt M6 x 1.0 x 35 (Qty: 2) |
| 4 |
A/Trans Manual Shift Shaft Position Switch Assembly Bracket |