EVAP Canister Purge Solenoid: Removal
WARNING: This page is about a different car, the 2003 Cadillac Seville and 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off. Disconnect the EVAP canister purge solenoid electrical connector. See Figure. Disconnect the EVAP canister purge pipe from the EVAP canister purge solenoid. Partially open the throttle. Remove the EVAP canister purge solenoid retaining bolt. Remove the EVAP canister purge solenoid from the intake manifold. Discard "O" ring.