Vehicle Speed Sensors: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Lubricate the input speed sensor seal with automatic transmission fluid. Install the vehicle speed sensors (1) and the bracket assemblies on the case. See Figure . Install the bolts and tighten to specification. See TORQUE SPECIFICATIONS . Connect the speed sensor connectors (2). Lower the vehicle.