LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1159 (Manual Transmission - AISIN AY6) >> Diagnostic Information and Procedures >> DTC P0806 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the scan tool CPP sensor voltage parameter. The reading should be between 4.75-0.25 volts and change as the clutch pedal is applied and released.
  2. Clear the DTCs with the scan tool. Operate the vehicle within the Conditions for Running the DTC, or within the conditions that you observed from the Freeze Frame/Failure Records. This DTC should not set.
scientia non olet · About LEMON Manuals