LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1158 (Engine Mechanical - 3.6L (3 Of 6)) >> Off-Vehicle Repair Instructions (1 Of 4) >> Water Pump Removal >> Procedures

Water Pump Removal: Procedures

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of EN 46104 on Water Pump Pulley
    GM1855646Courtesy of GENERAL MOTORS CORP.
  1. Install the EN 46104  (1) onto the water pump pulley.
  2. Fig 2: View Of Water Pump Pulley Assembly and Bolts
    GM1855647Courtesy of GENERAL MOTORS CORP.
  3. Remove the water pump pulley bolts.
  4. Remove the water pump pulley.
  5. Fig 3: View Of Water Pump Assembly and Bolts
    GM1855648Courtesy of GENERAL MOTORS CORP.
  6. Remove the water pump bolts.
  7. Remove the water pump from the front cover.
  8. Remove the water pump gasket.