LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1153 (Front Drive Axle) >> Repair Instructions >> Output Shaft Seal Replacement - Right Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the wheel drive shaft sealing surface of the oil seal with 75W90 synthetic axle lubricant, GM P/N 12378261 (Canadian P/N 10953455) or equivalent.
    2. Fig 1: Installing Right Differential Output Shaft Seal
    GM787229Courtesy of GENERAL MOTORS CORP.
  2. Install the right differential output shaft seal (2) to the J 45017  . See Special Tools .
  3. Using the J 45017  (1), install the right differential output shaft seal (2). See Special Tools .
  4. Remove J 45017  (1) from the right differential output shaft seal (2). See Special Tools .
  5. Install the right front wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement - Right Side .
  6. Inspect the fluid level. Refer to Rear Axle Lubricant Level Inspection .
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals