Conditions for Setting the DTC
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- The ECM detects the difference between the desired camshaft position and the actual camshaft position angle is greater than 5 degrees.
OR
- The ECM detects the difference between the actual camshaft angle and the locked position angle is greater than 1.5 degrees.
- The condition exists for greater than 1 second or cumulative of 5 seconds.
- The condition exists for greater than 1 second or cumulative of 10 seconds for LLT.