LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1139 (Immobilizer System) >> Diagnostic Information and Procedures >> DTC B302A (with RPO Y41) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition ON.
  2. Observe the security indicator. After approximately 10 minutes, the indicator will turn off.
  3. Turn the ignition OFF and wait 5 seconds.
  4. Repeat steps 2-4 two more times for a total of 3 cycles or 30 minutes.
  5. Turn the ignition ON. The start disable will now be cleared.
  6. With a scan tool, clear any DTCs.
scientia non olet · About LEMON Manuals