Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Connect the right air temperature actuator electrical connector.

Fig 1: View of Right Air Temperature Actuator

Courtesy of GENERAL MOTORS CORP.

Install the right air temperature actuator.

NOTE: Refer to Fastener Notice .

Install the right air temperature actuator screws (1).
Tighten: Tighten the screws to 1 N.m (9 lb in).

Fig 2: View of Right Air Temperature Actuator Screws

Courtesy of GENERAL MOTORS CORP.

Install the blower motor control module. Refer to Blower Motor Control Module Replacement .