Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Ignition Coil View

Courtesy of GENERAL MOTORS CORP.

Install the ignition coil(s).

NOTE: Refer to Fastener Notice .

Install the ignition coil bolt(s).
Tighten: Tighten the ignition coil bolt(s) to 10 N.m (89 lb in).

Fig 2: View Of Ignition Coil Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Install the ignition coil electrical connector(s).
If necessary, install the upper intake manifold. Refer to Upper Intake Manifold Replacement (LP1, LY7) .