Circuit/System Verification
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, observe the scan tool Memory Seat Module seat switch parameters. All of the seat switch parameters should be Inactive.
- If not the specified value, refer to Seat Adjuster Switch Test .
- Observe the scan tool Memory Seat Module seat switch parameters while pressing and releasing the related seat switch. The reading should change between Inactive and Active.
- If not the specified value, refer to Seat Adjuster Switch Test .
- If all switch inputs to the MSM function normal, refer to Seat Adjuster Motor Test .