Circuit/System Verification
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, press the sunshade switch to the open and close positions. The sunshade should open and close when changing between the commanded states.
- If the sunshade does not open and close, refer to the Sunroof/Sunshade Test below.
- Press the sunroof switch to the open and close positions. Both, the sunroof and the sunshade should open and close when changing between the commanded states.
- If the sunroof does not move in the commanded direction, refer to the Sunroof/Sunshade Test below.
- If the sunshade does not move in the commanded direction, refer to the Serial Data Circuit Test below.