Filler Tube: Removal
WARNING: This page is about a different car, the 2003 GMC Savana and 2003 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the transmission fluid level indicator from the fluid fill tube. Remove engine cover. Remove the bolt securing the transmission fluid fill tube bracket to the engine. Raise and support the vehicle. Remove the bolt securing the transmission fluid fill tube bracket to the transmission. Remove the transmission pan drain plug. Drain the fluid into an approved container. See Fig 1 .
- Remove any dirt from the transmission where the fluid fill tube enters the transmission case. Remove the transmission fluid fill tube from the transmission.
- Pull the tube upward from the transmission. Remove the transmission fill tube seal. Clean the metal parts using solvent. DO NOT allow the solvent to enter the transmission. Dry the parts using compressed air.