LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1120 (Disc Brake System) >> Repair Instructions >> Brake Rotor Assembled Lateral Runout Correction - On Vehicle Lathe >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

J 45101-100  Conical Brake Rotor Washers. See Special Tools .

CAUTION: Refer to Brake Dust Caution .
IMPORTANT:
  • Brake rotor thickness variation MUST be checked BEFORE checking for assembled lateral runout (LRO). Thickness variation exceeding the maximum acceptable level can cause brake pulsation. Refer to Brake Rotor Thickness Variation Measurement .
  • Brake rotor assembled LRO exceeding the maximum allowable specification can cause thickness variation to develop in the brake rotor over time, usually between 4 800-11 300 km (3,000-7,000 mi). Refer to Brake Rotor Assembled Lateral Runout Measurement .
scientia non olet · About LEMON Manuals