LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1119 (Rear Suspension System) >> Repair Instructions >> Adjust Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Adjustable Link Assembly
    GM1969866Courtesy of GENERAL MOTORS CORP.
  1. Position the adjustable link (1) in the frame.
    2. Fig 2: Identifying Mounting Bolts for Assembly
    GM1969746Courtesy of GENERAL MOTORS CORP.
  2. Hand tighten the mounting bolts (1) and (2).
    3. NOTE: Refer to Fastener Notice .
  3. Tighten the adjustable link mounting bolts (2).

    Tighten:  Tighten the mounting bolt to 160 N.m (118 lb ft).

  4. Tighten the adjustable link mounting bolts (1).

    Tighten:  Tighten the mounting bolt to 170 N.m (125 lb ft).

  5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  6. Remove the support and 7 lower the vehicle.
  7. Adjust the rear toe. Refer to Rear Toe Adjustment .
scientia non olet · About LEMON Manuals