Installation Procedure
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Position the primary camshaft drive chain lower guide to the oil pump.
- Install the primary camshaft drive chain lower guide bolts.
Tighten: Tighten the primary camshaft drive chain lower guide bolts to 23 N.m (17 lb ft).
- Install the primary camshaft drive chain tensioner. Refer to Primary Camshaft Drive Chain Tensioner Replacement .
NOTE:
Refer to Fastener Notice
.