LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Engine Mechanical - 3.6L (2 Of 6)) >> On-Vehicle Repair Instructions (1 Of 2) >> Oil Level Indicator And Tube Replacement (LLT) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Level Indicator Tube
    GM902882Courtesy of GENERAL MOTORS CORP.
  1. Remove the front compartment sight shield as necessary. Refer to Front Compartment Sight Shields Replacement .
  2. Remove the oil level indicator from the oil level indicator tube.
  3. Remove the oil level indicator tube bolt.
  4. Remove the engine splash shield. Refer to Engine Splash Shield Replacement .
  5. Lower the vehicle.
  6. Remove the oil level indicator tube up through the exhaust manifold.
  7. If you are replacing only the oil level indicator tube seal, remove and discard the old seal.
scientia non olet · About LEMON Manuals