Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Mirror Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors (1).

Fig 2: View Of Power Mirror Motor Pack

Courtesy of GENERAL MOTORS CORP.

Align the mirror face and backing plate assembly to the retaining tabs (1) on the motor pack.

Fig 3: Identifying Sanding Block on Mirror Face

Courtesy of GENERAL MOTORS CORP.

Using a 9 cm (3 in) rubber sanding block placed on the center of the mirror face, apply pressure until an audible click is heard.
Inspect the power mirror for proper operation.
Remove the masking tape.