LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1110 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Front Side Door Window Belt Inner Sealing Strip Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Front Door Window Inner Sealing Strip
    GM428710Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: When reusing the inner belt sealing strip, the flange mounting area must be pinched together in order to counteract the splaying effect when removed. Use a thumb and an index finger to pinch the carrier (3) back together.
  1. Install the sealing strip (1) to the door flange on the door inner panel.
    2. Fig 2: View Of Front Door Window Inner Sealing Strip
    GM758961Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not distort the sealing strip.
  2. Press downward to engage the sealing strip the entire length of the door.
  3. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
scientia non olet · About LEMON Manuals