LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1107 (Power Steering System) >> Repair Instructions >> Steering Linkage Outer Tie Rod Replacement (with All Wheel Drive) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
    2. Fig 1: View Of Tie Rod Retaining Nut
    GM687432Courtesy of GENERAL MOTORS CORP.
  2. Remove the steering linkage outer tie rod nut and discard it.
    3. Fig 2: View of Outer Tie Rod Assembly From Steering Knuckle
    GM643351Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the steering linkage outer tie rod from the steering knuckle using puller J 24319-B  . See Special Tools .
    4. Fig 3: Identifying Outer Tie Rod
    GM687434Courtesy of GENERAL MOTORS CORP.
  4. Loosen the steering linkage inner tie rod nut (1) and discard it.
    5. IMPORTANT: Note the number of complete turns made to remove the steering linkage outer tie rod.
  5. Remove the steering linkage outer tie rod (2) from the steering linkage inner tie rod (3).
scientia non olet · About LEMON Manuals