LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1107 (Power Steering System) >> Repair Instructions >> Power Steering Pump Pulley Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Steering Pump Pulley Installer
    GM643361Courtesy of GENERAL MOTORS CORP.
  1. Use installer J 25033-C  to install the power steering pump pulley.
    2. Fig 2: Measuring Axial Tolerance Of Power Steering Pulley On Pump
    GM254752Courtesy of GENERAL MOTORS CORP.
  2. Ensure that the axial tolerance of the power steering pump pulley on the power steering pump is within 0.25 mm (0.010 in).
  3. Install the air conditioning compressor and power steering pump belt to the power steering pump pulley. Refer to Air Conditioning Compressor and Power Steering Pump Belt Replacement .
scientia non olet · About LEMON Manuals