Front-to-Rear, Side-to-Side
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the fasteners securing the rear compartment lid to the rear compartment lid hinges.
- Align the rear compartment lid in order to achieve an equal 3 mm (1/8 mm) gap around the entire perimeter of the rear compartment lid.
- Tighten the hinge fasteners.
Tighten: Tighten the hinge fasteners to 25 N.m (18 lb ft).
NOTE:
Refer to Fastener Notice
.