Hood Latch Adjustment

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Ensure that you have the proper alignment of the hood to the body before you tighten the hood latch mounting fasteners under the following conditions:

After removing the hood latch assembly
After loosening the mounting bolts
After changing the hood adjustment

Fig 1: View Of Hood Latch

Courtesy of GENERAL MOTORS CORP.

With the hood latch attaching fasteners (1) loose, slowly lower the hood onto the latch (2) in order to achieve the proper cross vehicle adjustment of the hood latch.
Raise the hood.

NOTE: Refer to Fastener Notice .

Tighten the fasteners.
Tighten: Tighten the fasteners (1) to 9 N.m (80 lb in).