Removal Procedure
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
- Remove the push-in fasteners securing the fender sound insulator to the front fender.
- Remove the fender sound insulator.
- Mark the position of the hinge on the body.
- Support the door.
- Remove the hinge bolts (1) from the body.
- Remove the hinge bolts from the door.
IMPORTANT:
Replace only one hinge at a time then repeat procedure for the second hinge, if needed.