LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1103 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Side Door Hinge Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Door Hinges
    GM787975Courtesy of GENERAL MOTORS CORP.
  1. Align the hinge to the marks made on the body during removal.
    2. NOTE: Refer to Fastener Notice .
  2. Install the hinge to body bolts (1).

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

  3. Install the hinge to door bolts.

    Tighten:  Tighten the hinge to door bolts to 25 N.m (18 lb ft).

  4. Remove the door support.
    5. Fig 2: View Of Fender Sound Insulator
    GM738141Courtesy of GENERAL MOTORS CORP.
  5. Install the fender sound insulator.
    6. NOTE: Striker alignment is a crucial part of door latch operation. Do not use the door striker to adjust the door to the vehicle. Failure to properly adjust the striker can result in damage to the door latch and the striker.
  6. Adjust the door. Refer to Door Adjustment .
  7. Touch up any paint damage to the hinge and the bolts with body color paint.
  8. Install the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
scientia non olet · About LEMON Manuals