LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1100 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pilot Bearing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clutch. Refer to Clutch Assembly Replacement .
    2. IMPORTANT: When using the J 43276  always secure the J 43276-1 tool body using a wrench. See Special Tools . Do not allow the J 43276-1 tool to rotate. Failing to do so causes damage to the J 43276-1 tool body.
    Fig 1: Removing Clutch Pilot Bearing Using J 43276
    GM353275Courtesy of GENERAL MOTORS CORP.
  2. Remove the clutch bearing using the J 43276  . See Special Tools .
    1. Install the J 43276-1 into the clutch pilot bearing.
    2. Using a wrench, secure the J 43276-1.
    3. Insert the J 43276-2 into the J 43276-1.
    4. Rotate the J 43276-2 clockwise into the J 43276-1 until the clutch pilot bearing is completely removed from the crankshaft.
    5. Rotate the J 43276-2 counterclockwise to remove the J 43276-2 from the J 43276-1.
    6. Remove the J 43276-1 from the tool body.
scientia non olet · About LEMON Manuals