LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1100 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pedal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver side instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Replacement - Left Side .
  2. Remove the parking brake pedal assembly. Refer to Parking Brake Lever Pedal Assembly Replacement .
  3. Disconnect the clutch pedal position switch electrical connector.
    4. Fig 1: View of Clutch Master Cylinder Push Rod
    GM1979759Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the clutch master cylinder push rod (1) from the clutch pedal pin (2).
    5. Fig 2: Identifying Clutch Fluid Reservoir and Cowl
    GM1979757Courtesy of GENERAL MOTORS CORP.
  5. Remove the clutch fluid reservoir (1) from the cowl.
  6. Position the clutch fluid reservoir aside.
  7. Remove the vacuum brake booster. Refer to Power Vacuum Brake Booster Replacement .
    8. IMPORTANT: Do NOT disconnect the hydraulic hoses from the clutch master cylinder.
  8. Rotate the clutch master cylinder (2) clockwise 1/8 turn.
  9. Remove the clutch master cylinder (2) from the cowl.
  10. Remove the park brake pedal assembly from the I/P and position aside. Refer to Parking Brake Lever Pedal Assembly Replacement .
    11. Fig 3: Identifying Wiring Harness and Clutch Pedal Position Sensor
    GM1979762Courtesy of GENERAL MOTORS CORP.
  11. Remove the wiring harness connector (1) from the clutch pedal position sensor.
  12. Remove the wiring harness retainer (2) from the clutch pedal assembly.
    13. Fig 4: Identifying 2 Bolts and Clutch Pedal Assembly
    GM1979760Courtesy of GENERAL MOTORS CORP.
  13. Remove the 2 bolts (1) securing the clutch pedal assembly to the I/P carrier.
    14. Fig 5: View of Bolts and Clutch Pedal Assembly
    GM1979761Courtesy of GENERAL MOTORS CORP.
  14. Remove the 2 nuts (2) securing the clutch pedal assembly to the brake pedal assembly.
  15. Remove the nut (3) securing the clutch pedal assembly to the cowl.
  16. Remove the clutch pedal assembly (1) from the vehicle.
scientia non olet · About LEMON Manuals