Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Parking Brake Spring

Courtesy of GENERAL MOTORS CORP.

Assemble the park brake shoes (1) to the return spring (2).
Install the park brake shoe assembly to the backing plate by spreading the park brake shoes apart.
Position the park brake shoe assembly over the actuator.

Fig 2: View of Parking Brake Assembly Adjuster

Courtesy of GENERAL MOTORS CORP.

Assemble the park brake shoe adjuster.
Spread the park brake shoes and install the park brake shoe adjuster (1).

Fig 3: View of Parking Brake Spring

Courtesy of GENERAL MOTORS CORP.

Install the park brake shoe adjuster spring (1).

Fig 4: View of Parking Brake Pins

Courtesy of GENERAL MOTORS CORP.

Install the park brake shoe pins (1) by compressing the hold down springs (2) and rotating the spring 1/4 turn.
Install the rear brake rotor. Refer to Rear Brake Rotor Replacement .
Adjust the park brake. Refer to Park Brake Adjustment .
Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .