LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1099 (Parking Brake System) >> Repair Instructions >> Parking Brake Release Handle Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement .
    2. Fig 1: View Of Park Brake Release Handle Assembly
    GM786887Courtesy of GENERAL MOTORS CORP.
  2. Remove the park brake release handle screws.
  3. Remove the park brake release cable housing (3) from the park brake release handle assembly (1).
  4. Remove the park brake release handle (2) from the park brake release cable (1).
  5. Remove the park brake release handle from the vehicle.
scientia non olet · About LEMON Manuals