LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1099 (Parking Brake System) >> Repair Instructions >> Park Brake Release Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement .
    2. Fig 1: View Of Park Brake Release Handle Assembly
    GM786887Courtesy of GENERAL MOTORS CORP.
  2. Remove the park brake release handle screws.
  3. Remove the park brake release cable housing (3) from the park brake release handle assembly (1).
  4. Remove the park brake release cable (2) from the park brake release handle assembly.
    5. Fig 2: View Of Park Brake Pedal Assembly & Release Cable Housing
    GM754106Courtesy of GENERAL MOTORS CORP.
  5. Remove the park brake release cable housing (2) from the park brake pedal assembly (1).
    6. Fig 3: View Of Park Brake Cable & Pedal Release Lever
    GM754103Courtesy of GENERAL MOTORS CORP.
  6. Remove the park brake cable (1) from the park brake pedal release lever (2).
  7. Remove the park brake release cable from the vehicle.
scientia non olet · About LEMON Manuals