Turn Signal Multifunction Switch Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Turn Signal Multifunction Switch Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the steering column shroud. Refer to Steering Column Shroud Replacement .
1	Turn Signal Multifunction Switch Procedure Disconnect any electrical connectors as needed. Release the plastic retaining tabs and remove the turn signal multifunction switch from the turn signal switch bracket.

Callout

Component Name

Preliminary Procedure:
Remove the steering column shroud. Refer to Steering Column Shroud Replacement .

Turn Signal Multifunction Switch

Procedure

Disconnect any electrical connectors as needed.
Release the plastic retaining tabs and remove the turn signal multifunction switch from the turn signal switch bracket.