Circuit/System Testing
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Cycle the key from OFF to ON, monitor the IPC. The SIR warning indicator should flash then turn OFF.
- If the SIR warning indicator continually flashes, reprogram the SDM.
- With a scan tool, perform the IPC display test to command the IPC indicators ON and OFF. The Air Bag indicator should cycle between the commanded states.
- If the Air Bag indicator does not cycle between the commanded states, replace the IPC.
- If all circuits test normal, replace the SDM.