Front Hoist Pads

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Hoist Pads

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The front hoist pads must not contact the rocker panels, the front fenders, the floor pan, or the stone guard moldings. Remove the jacking covers from the rocker panels if necessary.

Position the frame contact front hoist pads as follows:

Under the front frame rail reinforcement.
The long sides of the pads, if applicable parallel to the frame rails.