Rear License Lamp Replacement
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Depress the outside of the rear license plate lamp with a flat-bladed tool and pull the lamp inward to remove the lamp from the rear compartment lid lower molding assembly. |
|
| 1 | Rear License Plate Lamp Assembly |
| 2 | License Plate Lamp Electrical Connector Tip: Rotate the bulb socket a quarter turn counter-clockwise and remove the lamp housing. |
| 3 | Rear License Plate Lamp Bulb Socket Tip: Pull the bulb straight out of the bulb socket. |