Circuit/System Description
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
The front and rear suspension position sensors provide the headlamp control module with front and rear suspension position information. Each sensor receives a 5-volt reference, signal, and low reference circuits from the headlamp control module. The sensor are connected to the control arms at the front and rear suspension. As the vehicle travels, the suspension compresses and rebounds moving the suspension position sensor arms. This causes the signal output of the sensors to change. The headlamp control module compares the information from the front and rear suspension position sensors and adjusts the headlamp leveling as needed.