Front Bumper Impact Bar Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Front Bumper Impact Bar Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove Front Bumper Fascia Energy Absorber. Refer to Front Bumper Fascia Energy Absorber Replacement (BRT) .
1	Front Bumper Impact Bar Nut (Qty: 8) NOTE: Refer to Fastener Notice . Tighten: 25 N.m (18 lb ft)
2	Front Bumper Impact Bar Preliminary Procedure Disconnect the electrical connectors/harnesses as needed. Transfer any parts as needed. Remove Radiator air baffles Unbolt and reposition the power steering cooler. Refer to Power Steering Cooler Pipe/Hose Replacement

Callout

Component Name

Preliminary Procedure:
Remove Front Bumper Fascia Energy Absorber. Refer to Front Bumper Fascia Energy Absorber Replacement (BRT) .

Front Bumper Impact Bar Nut (Qty: 8)

NOTE: Refer to Fastener Notice .

Tighten: 25 N.m (18 lb ft)

Front Bumper Impact Bar

Preliminary Procedure

Disconnect the electrical connectors/harnesses as needed.
Transfer any parts as needed.
Remove Radiator air baffles
Unbolt and reposition the power steering cooler. Refer to Power Steering Cooler Pipe/Hose Replacement