Hood Front Molding Replacement
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Raise and support the hood. |
|
| 1 | Hood Front Molding Tip: Upon installation, insert one side of the molding to the hood and work across the molding securing the individual retainer clips. |
| 2 | Hood Front Molding Retainer (Qty: 7) Tip: Release the retainer clips beginning from one side working towards the opposite side. |