Center Pillar Molding Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Pillar Molding Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Open both side doors on the side the molding will be serviced. Remove the front body side reveal molding. Refer to Body Side Window Reveal Molding Replacement .
1	Center Pillar Molding Tip: Grasp the molding and use a suitable retainer tool under each retainer in order to release the molding from the body panel.
2	Center Pillar Molding Retainer (Qty: 6)

Callout

Component Name

Preliminary Procedure

Open both side doors on the side the molding will be serviced.
Remove the front body side reveal molding. Refer to Body Side Window Reveal Molding Replacement .

Center Pillar Molding
Tip: Grasp the molding and use a suitable retainer tool under each retainer in order to release the molding from the body panel.

Center Pillar Molding Retainer (Qty: 6)