Valve Rocker Arm Cover Installation - Upper Left Side

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Upper Valve Rocker Arm Cover & Gasket

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The gasket may be reused if it is not torn, cracked, stretched, or swollen.

Install the upper valve rocker arm cover.

Fig 2: Upper Valve Rocker Arm Cover Bolts Tightening Sequence

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the upper valve rocker arm cover bolts.
Tighten: Tighten the upper valve rocker arm cover bolts to 8 N.m (71 lb in).