LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1079 (Engine Mechanical - 6.6L (5 Of 5)) >> Off-Vehicle Repair Instructions (4 Of 4) >> Engine Removal from Stand >> Removal

Engine Removal from Stand: Removal

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of J 36857 Installation Positions
    GM761238Courtesy of GENERAL MOTORS CORP.
  1. Bolt J 36857  to the ends of the cylinder heads. See Special Tools .
    2. Fig 2: Mounting Engine Block To Suitable Engine Stand
    GM1334858Courtesy of GENERAL MOTORS CORP.
  2. Lift the engine and the engine stand with a suitable hoist.
  3. Remove the engine stand from the engine adapter.
  4. Lower the engine to the floor. Support the engine with blocks.
  5. Remove the engine adapter.
scientia non olet · About LEMON Manuals