LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1077 (Engine Mechanical - 6.6L (3 Of 5)) >> Off-Vehicle Repair Instructions (2 Of 4) >> Engine Front Cover Removal >> Removal

Engine Front Cover Removal: Removal

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of CKP Sensor & Bolt
    GM1336119Courtesy of GENERAL MOTORS CORP.
  1. Remove the crankshaft position sensor bolt.
  2. Remove the crankshaft position sensor.
    3. Fig 2: View Of Engine Front Cover
    GM1336120Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine front cover bolts.
  4. Separate the engine front cover from the cylinder block using J 37228  . See Special Tools .
  5. Remove the engine front cover.
scientia non olet · About LEMON Manuals