LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1075 (Engine Mechanical - 6.6L (4 Of 5)) >> Off-Vehicle Repair Instructions (3 Of 4) >> Oil Pump Suction Pipe and Screen Assembly Installation

Oil Pump Suction Pipe and Screen Assembly Installation

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Pump Pipe, Screen Assembly & Gasket
    GM660531Courtesy of GENERAL MOTORS CORP.
  1. Install the oil pump pipe and screen gasket.
  2. Install the oil pump pipe and screen.
  3. NOTE: Refer to Fastener Notice .
  4. Install the oil pump pipe and screen assembly bolts and nuts.

    Tighten: 

    • Tighten the oil pump pipe and screen assembly bolts to 25 N.m (18 lb ft).
    • Tighten the oil pump pipe and screen assembly nuts to 25 N.m (18 lb ft).