Spring Jounce Bumper Replacement (1500)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Spring Jounce Bumper (1500)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
1	Jounce Bumper Bolt NOTE: Refer to Fastener Notice . Tighten: 33 N.m (24 lb ft)
2	Jounce Bumper

Callout

Component Name

Preliminary Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .

Jounce Bumper Bolt

NOTE: Refer to Fastener Notice .

Tighten: 33 N.m (24 lb ft)

Jounce Bumper