LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1069 (Steering Linkage) >> Repair Instructions >> Pitman Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering gear. Refer to Steering Gear Replacement (Rack and Pinion) or Steering Gear Replacement (Non-Rack and Pinion) .
  2. Place the steering gear into a vise.
    3. Fig 1: View Of Steering Gear And Pitman Arm
    GM1862648Courtesy of GENERAL MOTORS CORP.
  3. Remove the pitman arm nut (1) and washer (2).
    4. Fig 2: Remove Pitman Arm From Power Steering Gear (Non Rack and Pinion)
    GM398243Courtesy of GENERAL MOTORS CORP.
  4. Remove the pitman arm from the pitman arm shaft using puller J 6632-01  or puller J 29107-A  . See Special Tools .
scientia non olet · About LEMON Manuals