Transfer Case Disassemble: Notes

WARNING: This page is about a different car, the 2008 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 2619-01 Slide Hammer
J 3289-20 Holding Fixture
J 26941 Bushing and Bearing Remover - 3-4 inch
J 45124 Puller Bridge
J-45124-9 Puller Legs. See Special Tools .
J 45358 Case Spreader. See Special Tools .
J 45380 Transfer Case Rear Bushing Remover and Installer. See Special Tools .
J 45548 Mainshaft Support Bushing/Bearing Remover. See Special Tools .
J 45759 Assembly Fixture. See Special Tools .