Transfer Case Assemble: Notes

WARNING: This page is about a different car, the 2008 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 3289-20 Holding Fixture
J 8092 Universal Driver
J 22912-B Rear Pinion and Axle Bearing Remover
J 36850 Transjel Lubricant
J 42176 Universal Driver Handle - Non-Threaded. See Special Tools .
J 42738 Seal Installer. See Special Tools .
J 43484 Front Output Shaft Seal Installer. See Special Tools .
J 45380 Transfer Case Rear Bushing Remover and Installer. See Special Tools .
J 45756 Rear Output Shaft Seal Installer. See Special Tools .
J 45757 Mainshaft Support Bushing and Bearing Installer. See Special Tools .
J 45759 Assembly Fixture. See Special Tools .