Differential Carrier Assembly Assemble (9.25 Inch Axle): Notes

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 8092 Universal Driver Handle - 3/4 in - 10
J 8614-01 Flange and Pulley Holding Tool. See Special Tools .
J 35512 Inner Pinion Bearing Installer. See Special Tools .
J 36366 Pinion Oil Seal Installer. See Special Tools .
J 36599-A Side Bearing Nut Wrench. See Special Tools .
J 36603 Side Bearing Cup Installer. See Special Tools .
J 36609 Axle Tube Bearing Installer. See Special Tools .
J 36612 Output Shaft Bearing Installer. See Special Tools .
J 36614 Inner Pinion Bearing Installer. See Special Tools .
J 36615 Side Bearing Nut Wrench (9. See Special Tools .25 inch axle)