Installation Procedure
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the bracket to the vehicle.
- Install the washers and the nuts to the bracket.
Tighten: Tighten the bracket to frame nuts to 90 N.m (67 lb ft).
- For the 6.0L engine, install the air conditioning compressor. Refer to Air Conditioning Compressor Replacement (LY2, LY5, LH6, L76, L92 and LMG) or Air Conditioning Compressor Replacement (LLY/LMM) or Air Conditioning Compressor Replacement (LU3) .
- Install the differential carrier assembly. Refer to Differential Carrier Assembly Replacement (1500 FWD) or Differential Carrier Assembly Replacement (2500 4WD) .
- Lower the vehicle.
NOTE:
Refer to Fastener Notice
.