Component Testing
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the connector of the fuel injector to be tested.
- Connect a DMM between the terminals of the fuel injector and measure the resistance. The resistance should be 0.2-0.3 ohms.
- If the resistance is more than 0.2-0.3 ohms resistance, replace the fuel injector.