LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1056 (Automatic Transmission - 6L50/6L80/6L90 - DTC P0973 To DTC P2764) >> DTC P2714 or P2715 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the Transmission Fluid Check .
  2. Turn ON the ignition, with the engine OFF.
  3. IMPORTANT: Before clearing the DTC, use the scan tool in order to record the Freeze Frame and Failure Records.
  4. Record the DTC Freeze Frame and Failure Records.
  5. Clear the DTC.
  6. Operate the vehicle in drive with the calculated throttle position greater than 15 percent to obtain 72 km/h (45 mph) and achieve 5th gear. Perform this maneuver 2 times.
    • If the DTC resets, go to Circuit/System Testing.